-40%

Rustproof Brake line kit for 2003-07 Chevrolet GMC 1500 Ext Cab Shortbed 4wd

$ 31.67

Availability: 500 in stock
  • Returns Accepted: Returns Accepted
  • Other Part Number: 919-101
  • Restocking Fee: No
  • Item must be returned within: 30 Days
  • Manufacturer Part Number: BL101
  • Return shipping will be paid by: Buyer
  • Brand: TrueBend
  • Refund will be given as: Money Back
  • Condition: New

    Description

    Rustproof Brake line kit for 2003-07 Chevrolet GMC 1500 Ext Cab Shortbed 4wd
    -PVF lines are
    better than stainless steel
    as they are resistant
    to rust and abrasion, and yet seal better when assembled.
    -
    Our -
    PVF lines are also easier to form and bend than stainless steel
    and they do not suffer metal fatigue as they flex better with the car body.
    Many professionals prefer -
    PVF lines in their restorations!
    Buy for the future brake job!!!
    replace your rusted lines!!
    Polyvinylfluoride (PVF) is a durable, abrasion resistant outer coating for brake lines. - PVF exceeds 2,000 hours of salt spray testing, and is highly resistant to abrasion. - The PVF topcoat -is applied -and factory cured over an electro plated zinc -surface. - First used in Europe, this coating is now widely used on new cars and -trucks all over the world. - It is better than stainless steel because the inverted -flare connections on our lines still contain copper to seal the fittings. - Retrofitting stainless steel on inverted -flare fittings results in leaks because the -copper sealant -is not present.
    Important! Please enter your truck info in the compatibility section in this listing.
    If not sure if it fits your truck please message us for assistance.
    This kit is for the following:
    BL101
    2007
    Chevrolet
    Silverado 1500 Classic
    78.0 Inch BedLength; Extended Cab Pickup; 4WD; Rear Disc Brakes; Hybrid Submodel
    2007
    GMC
    Sierra 1500 Classic
    78.0 Inch BedLength; Extended Cab Pickup; 4WD; Rear Disc Brakes; Hybrid Submodel
    2006
    Chevrolet
    Silverado 1500
    78.0 Inch BedLength; Extended Cab Pickup; 4WD; Rear Disc Brakes
    2006
    GMC
    Sierra 1500
    78.0 Inch BedLength; Extended Cab Pickup; 4WD; Rear Disc Brakes
    2005
    Chevrolet
    Silverado 1500
    78.0 Inch BedLength; Extended Cab Pickup; 4WD; Rear Disc Brakes
    wo/Quadrasteer
    2005
    GMC
    Sierra 1500
    78.0 Inch BedLength; Extended Cab Pickup; 4WD; Rear Disc Brakes
    wo/Quadrasteer
    2004
    Chevrolet
    Silverado 1500
    78.0 Inch BedLength; Extended Cab Pickup; 4WD
    wo/Quadrasteer
    2004
    Chevrolet
    Silverado 1500
    78.0 Inch BedLength; Extended Cab Pickup; RWD; Front Torsion Bar Springs
    wo/Quadrasteer
    2004
    GMC
    Sierra 1500
    78.0 Inch BedLength; Extended Cab Pickup; 4WD
    wo/Quadrasteer
    2004
    GMC
    Sierra 1500
    78.0 Inch BedLength; Extended Cab Pickup; RWD; Front Torsion Bar Springs
    wo/Quadrasteer
    2003
    Chevrolet
    Silverado 1500
    78.0 Inch BedLength; Extended Cab Pickup; 4WD
    wo/Quadrasteer
    2003
    GMC
    Sierra 1500
    78.0 Inch BedLength; Extended Cab Pickup; 4WD
    wo/Quadrasteer
    All information on lines are for OEM brake systems only. The lines may not fit any brake system that has been modified. Fits left hand drive vehicles.
    This is a complete brake line replacement kit. All lines are supplied double-flared at each end with S.A.E. specified male inverted flare fittings attached -- ready for quick easy installation. All brake lines have an extra long nut on one end to seat in late model deep-seated wheel cylinders. These -malleable lines are easy to bend or coil without collapsing the tubing or restricting the flow of brake fluid. A chart of your brake system is included and all lines are clearly marked and numbered as to where they should be installed. Couplers are included where necessary.
    -
    Our TrueBend®- brake lines resist corrosion, vibration, fatigue and shock from impact. They are -coated for corrosion protection in compliance with GM132M-ASV and SAE J527B. - Each line is manufactured by double wrapping a copper coated steel strip to form a double wall tube. - Then, the tube is furnace brazed to fuse the copper/steel tube into one continuous and seamless tube. - The tube is then given a PVF outer coat for corrosion and abrasion resistance. These lines are the strongest and safest avai- yet can still be easily bent without kinking or without damaging the - PVF outer coat.
    -
    In any correspondance please be specific and include our ebay
    # EE21932
    our easy terms
    We will send you a Email with the payment options within 1 business day of the auction close.
    If not received within 1 business day after auction closes please message us.
    We ask the winner to send the payment within 7 days to us.
    If payment is not received after 10 days, we will send a reminder by email. We processed by the next business day after payment and will send an email when we ship. Also, we will provide the tracking number if available. If no payment is received or any contact is made within 21 days (three weeks), we report the non-payment to Ebay and the item is auctioned again. Sales tax must be collected in Minnesota (6.50%).
    We want you to be satisfied.
    We will do whatever it takes to make things right.
    For Returns you must contact us prior to 45 days from date of sale.
    We ship World-wide
    by the Mail.  We will have to charge additional handling, insurance and shipping.  Email us for the rates. All shipments must carry the proper value (we cannot evade your local taxes). We ship UPS, Priority Mail and First-class mail. Special request to ship to FPO or box numbers may incure additional shipping charges.
    We will discount shipping for combined shipments:
    Please ask us to hold up your processing if you are bidding on additional items
    Powered by SixBit's eCommerce Solution